P E A V E Y E L E C T R O N I C S
SPECS
TM
410TVX
Bass Enclosure
SPECIFICATIONS
Frequency Response, 1 meter on-axis,
swept-sine in anechoic environment:
30 Hz to 15 kHz
Power Handling:
350 W continuous (37.4 V RMS)
700 W program
Sound Pressure Level, 1 watt, 1 meter in
anechoic environment:
97 dB (2.8V 8 ohm)
97 dB (2.0V 4 ohm)
Transducer Complement:
®
4 x 10" Sheffield bass guitar
speakers
1 x 1" Phenolic dome horn
tweeter
Box Tuning Frequency:
50 Hz
Crossover Frequency (Internal Passive):
3,000 Hz
Impedance:
Nominal:
8Ω (8 ohm)
4Ω (4 ohm)
Minimum:
7.6Ω (8 ohm)
4.1Ω (4 ohm)
can be tailored to complement any style
of playing. A protection circuit has been
incorporated into the crossover to help
prevent damage to the horn tweeter in
the event of overpowering. If the average
signal level going to the tweeter exceeds
a certain threshold, the protection circuit
is engaged.
•
•
Horn tweeter with level
control
Protection circuit for horn
tweeter
Input Connections:
1 x 1/4" phone jack
Enclosure Materials and Finish:
®
3/4" MDF, Tolex covered with
Description
metal corners and an expanded
metal grille
™
The 410TVX is designed as a full-range
bass guitar enclosure. This enclosure is
covered with tough, black vinyl to give
the player a rugged and easy-to-clean
surface. The metal corners and grille add
protection from the bumps and bruises
encountered “on the road.”
Dimensions (H x W x D):
28.25" x 24.50" x 19.25"
(71.8 cm x 62.2 cm x 48.9 cm)
When this occurs, the horn will almost
completely stop producing sound, until
the signal level is reduced and the circuit
disengages. Then the horn tweeter will
again produce sound. Please note that
this protection circuit is for long-term
(average signal level) protection. It is still
possible for transients (short-term peaks)
to damage the horn.
Net Weight:
101 lbs. (45.0 kg)
Features:
The 410TVX utilizes four 10-inch
®
•
Improved crossover for better
midrange tone
Sheffield bass speakers, a horn tweeter
and a custom crossover designed for
great articulation, tone and clarity. A high
frequency level control is part of the
crossover so the high frequency output
•
Vents located on front of
cabinet
|