SPECIFICATIONS
SP™ 118
Dimensions (H x W x D):
Width: 20.80" / 528mm
Depth: 29.88" / 759mm
Height: 32.29" / 820mm
Net Weight:
107 lbs. (48.5 kg)
FEATURES
This loudspeaker system delivers
high output, low distortion bass
from a single 18" Pro Rider woofer
mounted in a vented enclosure.
This unit is designed for
portability. The enclosure is
constructed of Aspen hardwood
plywood augmented with
dual-layered top and bottom
panels covered with heavy duty
textured black Hammertex™ and
reinforced with high impact plastic
corners. A full-length wrap-around
perforated steel grille protects
the front of the enclosure. A pole
mount is also included for support
of a high-pass enclosure.
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
Transducer Complement:
One 18" woofer, vented
1808-8 ALCP Pro Rider®
49 Hz to 300 Hz (±3 dB)
Box Tuning Frequency:
Usable Low Frequency Limit
(-10 dB point):
38 Hz
34 Hz
Minimum Recommended Active
Crossover Frequency and Slope for
Bi-amping:
Power Handling:
600 Watts continuous
1,200 Watts program
2,400 Watts peak
90 Hz at 18 dB / octave
High-pass filter 35 to 40 Hz
at 12 to 24dB/octave is
recommended
Sound Pressure Level, 1 Watt, 1 Meter
in Anechoic Environment:
Impedance (Z):
Nominal: 8.0 Ω
Minimum: 6.5 Ω
98.0 dB (2.83 V input)
Maximum Sound Pressure Level
(1 meter):
Input Connections:
126.0 dB SPL continuous
132.0 dB SPL peak
One four-pin twist lock connector
Two 1/4" jacks
All inputs in parallel
Radiation Angle Measured at -6 dB
Point of Polar Response:
Enclosure Materials & Finish:
Aspen hardwood plywood
with internal bracing finished
in Hammertex™ covering
Essentially omnidirectional
SPECIFICATIONS
SP™ 118
SPECIFICATIONS
SP™ 118
SP 118 Input Plate
80305558
Features and specifications are subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305 • (601) 483-5365 • www.peavey.com
©2010 Printed in the U.S.A. 02/10
|